Page Steel Fabrications have the ability to shot blast / grit blast all steel sections up to 24m in length. The automated section blaster thoroughly cleans steel up to a class 2.5 blast. This type of automation eliminates the old style of cleaning steel with power wire brush to class 1 or hose and blast nozzle to class 2.5.

As most clients know there is no comparison between a power wire brush finish and a blasted finish. Even at the lowest blast specification of class 1, Page Steel well exceed this minimum, and produce closer to class 1.5 to class 2 at no additional cost to the client. The extra blast preparation ensures that even basic primed steel has a far better finish than clients expect.

The automated section blaster is environmentally friendly, as it recycles all of its own shot / grit until small enough to be separated into a fines out bin. The rust particles are separated and disposed of. EPA and Worksafe approved fume extraction units have been fitted to evacuate all fumes from the painting area.

Page Steel Fabrications utilise an airless system that is fitted to a bulk paint storage system. This storage system enables usage of 200lt drums or conventional 20lt drums. Painting is performed on two shifts to achieve 20 tonnes per shift.